Best Asphalt Driveway Sealer Consumer Reports

Best Asphalt Driveway Sealer Consumer Reports, Tips, Reviews, Ratings, and Guides in 2022

When it comes to driveway sealers, there are a lot of options on the market. So, which one is right for your home? Check out our latest blog post to learn more about the best asphalt driveway sealers and what to look for before making your purchase. With so many products available, it can be tough to know where to start. But don’t worry – we’re here to help! Keep reading for more information on the top sealers on the market today.

What is an asphalt driveway sealer?

Asphalt is the material most used for driveways due to its low cost, easy installation, and durability. To give your asphalt driveway increased protection against cracks and degradation, you can apply a sealer during or after construction. Asphalt driveway sealers come in different forms including liquids, waxes, polyurethane coatings, and more – many of which are available at local hardware stores near you.

Most Common Types of asphalt driveway sealer:

Liquid Asphalt Driveway Sealer: Liquid asphalt driveway sealers have been used for many years and are frequently found in hardware stores. This type of product is applied with a roller or sprayer, dries rapidly, and can be walked on immediately. Some liquid asphalt driveway sealers don’t require mixing – but it is generally recommended that you mix the entire container before application.

Wax Asphalt Driveway Sealer: A wax-based asphalt driveway sealer provides a deep shine and attractive finish when applied correctly. While they can be a little more expensive than other types of sealants, a pure wax formula provides lasting protection against weathering and staining from oil, grease, coolant leaks from automobiles, salt stains from winter road treatments, and heavy foot traffic.

Polyurethane Asphalt Driveway Sealer: Polyurethane asphalt driveway sealers provide maximum protection for your driveway and are highly resistant to salt, oil, gas, antifreeze, and other automotive chemicals – making them a great choice if you have cars that you park on your driveway regularly or if your home is near the road or other paved areas where these chemicals are used frequently. These types of sealers also last longer than other products, so you won’t have to reseal as often.

Factors to Consider before buying an asphalt driveway sealer:

When choosing an asphalt driveway sealer, you’ll want to consider several factors including the weather conditions of your area, the type of sealant you’re looking for (liquid, wax, polyurethane), and how long you plan on parking cars on your driveway. Here are a few tips to keep in mind when shopping around:

Needs: What materials is your driveway made from? If it’s a natural stone or paver surface, a liquid asphalt driveway sealer will work best. However, if your driveway is made from blacktop or bituminous concrete pavement – then a wax-based product would be perfect.

Weather Conditions: Plan on applying an asphalt driveway sealer during the spring, summer, or fall? Liquid asphalt driveway sealers and polyurethane coatings will work best in these conditions.

Placement: Where do you plan on parking your cars most often? If you’ll be placing them on your new asphalt driveway frequently, a wax-based product is likely your best choice.

Price: How much can you afford to spend on an asphalt driveway sealer? While some products are more expensive than others, they vary depending on how long it lasts as well as their ability to protect the surface against damage from weathering and staining.

Cure and Seal Products: If you are sealing an existing asphalt driveway, you will have to first clean the surface. You can either pressure wash or use a degreasing cleaner which usually consists of TSP (trisodium phosphate). Most professionals recommend using the power washer method because it allows for faster removal of oil and grease, but if you do decide to go with this option be sure that you protect all surrounding plants and vegetation as well as any nearby windows or doors that may become dirty due to debris from the driveway.

Penetrating Sealers: Penetrating sealers are applied to asphalt driveways that do not need surface preparation. They work by penetrating the asphalt and treating it from within, helping to prolong its life and protect it from damage.

Mold Inhibitors: If you live in a humid or wet region, you must buy an asphalt driveway sealer with a built-in mold inhibitor. Without this powerful additive, moisture will step down into the surface of your driveway and cause unsightly yellow spots to appear.

Binder Modifiers: When shopping for an asphalt driveway sealer, be sure that it has binder modifiers that essentially protect the asphalt from deteriorating when exposed to sunlight and other weathering elements. Be aware that many low-quality products do not have these additives – so only purchase sealers from reputable brands if possible. 

Sealer Longevity: How long does an asphalt driveway sealer with protective properties last? The longevity of your choice depends on your geographical location, traffic conditions, and weather patterns. Typically speaking, you can expect most liquids and polyurethanes to last up to three years if applied correctly while wax-based products should be replaced every 12-18 months for maximum performance. 

Weight:  The weight of the sealant should be taken into consideration as well. After all, you don’t want to have to reapply it too frequently! All asphalt driveway sealers are classified based on their weights so take note of this when purchasing your next product. 

UV Stabilizers: Ultraviolet stabilizers keep the sealer’s binder from deteriorating because of sunlight exposure. They also have oxidation inhibitors that prolong the life of your new asphalt driveway sealer purchase by up to 2 years if they’re built-in into your choice.

Surface Effects: Some sealers can hurt the color, texture, and surface of your asphalt driveway. Be sure to check this before you buy by looking at product reviews from other users.

Application: How much time do you have to apply the asphalt driveway sealer? The application process takes around 1-2 hours so if you want to start parking on it right away after applying, choose a product that doesn’t require too much downtime between applications and clean up.

Benefits: There are several benefits to sealing your asphalt driveway. First and foremost, it will extend its life by years, so you won’t have to deal with expensive repairs or replacement costs anytime soon. A sealer also protects against weathering elements such as rain and UV rays which is why they’re the most popular choice in climates where this is a serious problem. And if you choose a penetrating sealer, it can restore damaged surfaces and eliminate oil stains – thanks to its binding agents that help rebuild cracks and fissures.

Ease of application: Most asphalt driveway sealers are easy to apply by hand or with a power sprayer. However, you should always do some research on the product that you’ve chosen before buying because some products require specific instructions for use – especially if they come with their applicator!

Downtime: If you don’t want your asphalt driveway to be off-limits during the application, make sure that it’s completely dry and free of any dirt, debris, oil stains, or brake dust. Penetrating sealers typically have no downtime whatsoever while topical sealers can take anywhere from 1-2 days to fully cure.

Price: The price of an asphalt driveway sealer is determined by many different factors including its longevity (the amount of time it lasts), its ingredients, and the required application methods. Prices typically range from $14-65 per gallon for penetrating sealers to $55-150 per gallon for polyurethanes so be sure to check the label of your chosen product carefully before buying.

Availability: Most asphalt driveway sealers can be purchased at home improvement stores or commercial facilities such as a pressure washer outlet. Large cities with a good variety of shopping options will likely have a better selection – especially if they’re on top of their local building trends! If you want to purchase one online, multiple websites sell these products – some even offer shipping services.

Maintenance: Asphalt driveway sealers will typically last a long time if they’re applied correctly. However, it’s also important to note that you must reseal your asphalt driveway every couple of years – even if your current product says that the surface is watertight. Failure to do this will compromise the integrity of your driveway and it’ll crack much sooner than expected.

Application instructions: Most asphalt driveway sealers require the surface to be clean and dry before application. They usually come with some extra goodies such as spreader sticks, gloves, and even dust masks so make sure that you read the label carefully before buying. Some products also need specific procedures for cleaning and drying your asphalt driveway – especially if they’re penetrating sealers (and not topical ones).

Brands:  There are many different brands of asphalt driveway sealers, and each product offers a slightly different formula – which approaches your problems from a variety of angles. Some brands to look out for include: Malco Products, Sashco Sealants, Tremco, Perma-Seal Concrete & Asphalt Paving Products, and many others!

Sealer’s Compositions:  Asphalt driveway sealers typically contain a variety of binders that will leave your asphalt as fresh as the day it was laid. Some common ingredients include petroleum distillates, paints, and acrylics – although this will be different depending on which product you choose.

The Pros and Cons of asphalt driveway sealer:


An asphalt driveway sealer can help your roof resist the effects of harsh weathering thanks to its strong binders and bonding agents. They’re available in all sorts of colors and combinations which makes them easy to match with both your home exteriors and interiors. And if you choose a high-quality sealant, it’ll also protect your driveway from environmental hazards such as oil stains and brake dust – keeping it looking like new for longer!

Cons: Asphalt driveway sealers may not be able to completely stop weed growth on their own since it’s difficult for chemical compounds to penetrate asphalt (a porous material). However, fertilizers such as those that contain iron phosphate will prevent any weed or grass growth without damaging your driveway. You should keep this in mind if you’re currently facing an infestation or if you’re planning to reseal your asphalt soon.


How does asphalt driveway sealer work?  

Asphalt driveway sealers work by binding to the surface of your asphalt and covering up cracks so that water can’t penetrate. Some penetrating sealers will also bind with oil stains which is why they’re great for eliminating previously encountered problems!

Are there any alternatives to applying asphalt driveway sealer?

The only alternative is to remove and replace your old asphalt driveway with a new one – which isn’t always practical or affordable (especially if you live in an area where there’s a limited supply of asphalt).

Is it better to use an asphalt driveway sealer or paint my driveway?  

Although either option can stop water from getting into your asphalt, only one of them will last through the test of time – and that’s a sealant. Paint typically chips away over time which means that its protective abilities are compromised.

How long does it take for an asphalt driveway sealer to dry?

An asphalt driveway sealer can take anywhere from 1-2 days to fully cure – depending on the product that you choose! However, some products will need up to 24 hours before you can drive over them.

What are the best sealing tools for my asphalt driveway?

A high-powered pressure washer with a spray wand or a V-shaped sprinkler should do the trick! Just make sure that there are no dirt or oil stains on your driveway before using these tools, so you don’t compromise your hard work!  

What are Asphalt driveway sealer products used for?

Asphalt driveway sealers are meant to protect your pavement from all types of weather – especially rain and UV rays. That makes them perfect for climates with heavy thunderstorms or high sun exposure while also making them great for commercial applications like shopping malls! However, make sure you pick the right product because not all formulas can repel water or resist the sun.

What causes asphalt driveway sealant to fail?  

If you’re using the wrong product, then your driveway sealant will likely fail because it won’t be able to protect your asphalt against harsh conditions. For example, if you live in an area with lots of rainfall or are planning on resealing your asphalt soon, then it’s best not to use a water-resistant sealant because it’ll only last through the first shower! So, make sure you do some research before making a purchase and talk to professionals about what kind of sealer is right for your needs and climate.

Why does my garage floor look wet after applying an asphalt driveway sealer?  

Your garage floor may appear wet after applying an asphalt driveway sealer because many formulas offer a “moisture cure” – which means that they need to be kept wet for a certain amount of time before you can walk on them. This is so the product has enough time to bind with the surface and create a natural-looking sheen across your asphalt!

How long does an asphalt driveway last?  

An asphalt driveway typically lasts anywhere from 10-15 years if it’s properly maintained. However, other factors such as heavy rainfalls, bad weather conditions, and other damage can affect the lifespan of your asphalt.

What is the difference between blacktop and asphalt?  

Blacktop is just loose gravel that has been sprayed with water to create the black color. However, there are no binding properties which mean it’s more likely to move around than an asphalt driveway. However, blacktop is also much cheaper than asphalt so if you’re looking for something cost-effective then this might be your best option!

How do I fix a pothole?  

The first thing you’ll want to do is fill up the hole with soil and compact it down (this should only take 1-2 minutes!). Then, pour hot asphalt into the area and smooth it out with an iron rake to make sure that everything sticks together. And lastly, spray some cold water on top of everything – this will help the asphalt cure faster and help your pothole claim be fixed in a jiffy!

What is a weaker spot of asphalt?  

The weakest spots on asphalt are typically on the edges of the pavement, which means that these areas will chip away first. This also means that you’ll want to avoid removing any grass from alongside your driveway if it’s already been paved! However, even though the edges might break before other parts of your driveway, they can still be properly sealed so make sure you pick up an appropriate product for that area or hire a professional if need be!  

Is oil or water-based driveway sealer better?  

For a driveway, you want to use an oil-based formula because it’s much more effective at repelling water. So, if you’re looking for the best possible protection from rain and other weather conditions then go with oil-based sealants!  However, make sure you read the instructions carefully before purchasing because some formulas can only be used on certain surfaces.

Can I use water-based asphalt driveway sealant?  

Yes, but you mustn’t choose something that repels water because this means it won’t be able to protect your asphalt against harsh conditions. For example, if you live in an area with lots of rainfall or are planning on resealing your asphalt soon, then it’s best not to use a water-resistant sealant because it’ll only last through the first shower! So, make sure you do some research before making a purchase and talk to professionals about what kind of sealer is right for your needs and climate.

Is the latex driveway sealer any good?  

No, it’s not effective enough at protecting your asphalt against harsh weather conditions so you’ll need to stay away from latex. Instead, go for a more high-quality sealant that’s oil-based! However, keep in mind that this type of product is also much harder to apply – but if you’re still interested then speak with a professional about what kind of sealer is best for your needs.

How often should you seal your driveway?

It depends on your needs! If you live in an area that sees a lot of rainfall, then you’ll want to reseal your asphalt at least once per year. Otherwise, if you’re on the fence about how often to do it then spring and fall are good times to apply sealant because they don’t experience as much rain. And lastly, make sure you always pick up some paint or oil-based sealer before sealing your asphalt – this helps stain penetration, so everything looks nice for years to come!  

How much does it cost to seal a driveway?

On average, you can expect to pay around $1 per square foot for sealing your asphalt. However, the cost of the sealer is just one part of this – if you’re looking to reseal your driveway then you’ll also want to purchase an applicator and since some professional’s charge by the hour it might even be more than $1! So, make sure you do some research before hiring anyone because not all of them are equal in price.

Is there a difference in driveway sealers?

There are a few differences between sealants: some formulas resist water; others repel it, and the rest don’t either. So, if you want to get rid of stains and potholes then go for something that resists water while also filling in chips and cracks – this way your driveway will remain smooth throughout wet seasons! Also, make sure you investigate how long the product lasts because typically, more expensive products last longer than cheaper ones.

What is an alternative to an asphalt driveway sealer?

Since asphalt needs only oil-based sealers to protect it from weather conditions, there’s no real alternative. However, you can use concrete sealant which does a more than adequate job at protecting your pavement but doesn’t last if asphalt sealant. Therefore, you should always take into consideration your climate and how often you’ll need to reseal your driveway because not all sealers are the same!

Can I mix sand with a driveway sealer?

No! For starters, this won’t work as well as using the proper sealant and secondly, you’ll damage your asphalt. Instead of trying to make a homemade recipe for sealing your asphalt, always go with oil-based sealants that come in an applicator, and don’t try to substitute it with anything because you could end up doing more harm than good!

How do I patch up my driveway?

Before applying any product at all, patching up your asphalt is essential: if there are cracks then they need to be filled in right away, so no water gets through – otherwise, use a big piece of cardboard or even large rocks until you have time to purchase some high-quality sealant. And remember that since water is what causes your asphalt to wear out over time, making sure it doesn’t get in through cracks or holes will keep everything looking great!

Is there any way to fix an uneven driveway?

Yes, but you’ll need some patience because repairing it yourself isn’t easy – however, it’s possible if you have a little bit of knowledge about asphalt. It always starts with the proper tool for this kind of thing: a jackhammer that will get rid of all bumps and holes in your asphalt so they can be filled in with gravel and sand! After that, use your driveway sealer to close everything up and make sure it’s smooth to drive on.

What is the best time to apply paint or oil-based sealant?

The best time to do it is spring because the humidity isn’t nearly as high – but since you can’t know when exactly this will happen, fall works just fine too because it’s not as cold. However, make sure you check the weather channel because rain or snow can ruin your expensive sealant and cause you to start over – therefore sealing your driveway is only a good idea if it’s nice outside so there won’t be any complications!

What happens if I don’t seal my asphalt?

It’ll become even bumpier than before and will crack, chip, and get dirty fast: your best option here would be to just re-pave the whole thing because that way, everything will work out great. However, using oil-based sealants will help protect your asphalt from harsh weather conditions which means they’re worth looking into for people who want their driveways to last if possible!

What kind of temperature does asphalt need?

With regards to paint or oil-based sealants, the temperature isn’t an important factor because the sun does all the hard work for you by warming up your asphalt. However, make sure it’s not too cold or hot – otherwise, the product won’t apply right and will cause problems later! You should always check with a thermometer to see what kind of weather is okay before applying anything, so no damages are done to your driveway.


Asphalt sealants are the best way to protect your driveway from various weather conditions! Now you have all the information you need about oil-based sealers so feel free to look around for high-quality products that will do what they’re supposed to. With correct maintenance, your asphalt should stay protected and even last longer – which is why you should care about your driveway just as much as you do with any other part of your home!